VARASTOSSA - IN STOCK CLICK HERE FOR DEMO/INSTRUCTIONAL VIDEOS
Z-Vex Inventobox (Loaded with Fuzz Factory, Super Hard-On and Tone Stack modules) Ever want to build your own pedal, but weren't interested in the soldering, drilling, painting, and all of the assembly needed to make one from scratch?
The Z.Vex Effects Inventobox is a unique new product which allows you to quickly design, build and/or modify your own pedals without soldering! The Inventobox comes with two different channels so you can build either one or two different devices into the same box. All of the necessary components are included to make it easy for you... there's a variety of potentiometer values and switches already inside the box, quickly accessible through tiny sockets which accept standard experimenter socket wires or included cables. The unit is easily opened by hand to make fast modifications to the circuitry.
The Loaded version of the Inventobox comes with a Fuzz Factory, Super Hard On, and Tone Stack module already installed.
Four Basic Components:
The enclosure with 4 permanently-mounted 100k potentiometers (rotary controls), two 3-position switches, 5 multi-colored LEDs, and two stomp switches with on/off LEDs.
Inside the dual enclosure is a window which contains connectors to access the input and output for channels 1 and 2, an LED work light to see the connectors more clearly, a 9VDC power connection, and various connectors for the multi-colored LEDs and potentiometers.
The lid for the upper part of the enclosure which contains 12 removable potentiometers (the order and values can easily be changed), 12 LEDs, and sockets which let you easily hook up wires from your pedal circuit to the various controls and LEDs.
The lid also has a removable brass shielded tray which contains an experimenter's socket where you build up your circuits.
Modules:
Z.Vex Effects is presently introducing 3 modules so that you can easily build up famous Z.Vex circuits into your Inventobox. The first three will be the famous Super Hard-On, the Fuzz Factory, and a fully-buffered Tone Stack module that emulates the bass/mid/treble controls on a Marshall® amplifier. These modules plug into the experimenter's socket, eliminating the need to wire up most individual components. They're labeled with the connections you'll need to make to the pots. Adding a few jumpers to the board makes it easy to wire these circuits up in standard configuration, but if you want, you can adjust the values of different capacitors and resistors (and even the transistors on the Fuzz Factory) to suit your own tastes! Instructions for modifying the tone of your circuits are included with each module.
Assembling one module into the Inventobox can be done as quickly as 5 or 10 minutes! Changing the tone of the module to suit your personal tastes can be done in a matter of seconds. Using the stainless support rods, you can leave the lid floating above the enclosure and adjust the tone by quickly changing parts until you reach your ultimate sound!
The most amazing thing about modular construction for the Inventobox is that it's open-source! Anyone can design and build their own modules for the Inventobox.
Design Features: The Inventobox has several unique design features (patents pending) which make it easy to use as well as road-worthy when assembled. The brass tray provides electrostatic shielding between the bottom of the experimenter's socket and the potentiometers, eliminating cross-talk and noise issues. The removable brass tray on the upper enclosure's lid allows access to 12 removable potentiometers so you can easily set up the correct order for your pots, making the controls easy to remember. The design of the tray allows you to put a securing rubber band around the tray's edge to keep all potentiometer and LED wires in place. This makes the unit road-worthy. The security of the components and wiring is further enhanced by the use of one or more foam inserts which rest against the inside of the upper enclosure, holding vital components in place on the experimenter's socket. The lid locks in place on the two stomp switches for easy assembly when hooking up the cables to wire your circuit into the box. Just set the lid upside down on top of the stomp switches to lock it in place. Also, there are two stainless rods that hold the lid above the upper enclosure if you need to have it closer for easier wiring. Just slip the rods into the threaded screw holes in the enclosure, then hook the bent ends onto the lid.
Other design features include labels on the brass tray and potentiometers that describe connections and values, and a specially-designed circuit board that holds the pots in alignment when changing the order for your designs.
There are a number of different cables included with the Inventobox which provide a complete set of every type of wiring configuration you might need to connect your experimenter's socket to the inside of the lower enclosure. They come in two lengths, 100mm and 150mm, making it easy to reach the experimenter's socket on either the top or bottom.
|
